Deformation Behavior Estimation of Aluminum Foam by X-ray CT Image-based Finite Element Analysis

作者：Hangai Yoshihiko^*; Yamaguchi Ryo; Takahashi Shunya; Utsunomiya Takao; Kuwazuru Osamu; Yoshikawa Nobuhiro

来源：Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science, 2013, 44A(4): 1880-1886.

DOI：10.1007/s11661-012-1532-7

Aluminum foam is a lightweight material owing to the existence of a large number of internal pores. The compressive properties and deformation behavior of aluminum foam are considered to be directly affected by the shape and distribution of these pores. In this study, we performed image-based finite element (FE) analyses of aluminum foam using X-ray computed tomography (CT) images and investigated the possibility of predicting its deformation behavior by comparing the results of FE analyses with those of actual compressive tests. We found that it was possible to create an analytic model reflecting the three-dimensional (3D) pore structure using image-based modeling based on X-ray CT images. The stress distribution obtained from image-based FE analysis correctly indicates the layer where deformation first occurs as observed in actual compressive tests. Also, by calculating the mean stress of each plane perpendicular to the direction of compression based on the stress distribution obtained from image-based FE analysis, it was found that deformation begins in the layer containing the plane with maximum stress. It was thus possible to estimate the layer where deformation begins during the compression of aluminum foam.

• 出版日期2013-4