科研之友
微信
新浪微博
Facebook
分享链接
摘要
A novel type of fuel cell gas diffusion layer with patterned wettability is herein reported. The production of hydrophilic patterns by radiation grafting depends on two main steps: electron beam activation and polymerization reaction. In this first part of the series, we are giving extensive details about the synthetic routes for modifying porous media's wettability. Two monomers (acrylic acid and N-vinylformamide) were used for the hydrophilization of the fluoropolymer and a parametric study was performed. Finally, a preliminary thermal degradation study was carried out. We found conditions to produce hydrophilic gas diffusion layers with short reaction times (about 10 minutes) and proved that the synthetic method is suitable for creating local modifications. For hydrophilic surfaces, the coating load significantly impacts wetting dynamics. (C) The Author(s) 2016. Published by ECS. This is an open access article distributed under the terms of the Creative Commons Attribution Non-Commercial No Derivatives 4.0 License (CC BY-NC-ND, http://creativecommons.org/licenses/by-nc-nd/4.0/), which permits non-commercial reuse, distribution, and reproduction in any medium, provided the original work is not changed in any way and is properly cited. For permission for commercial reuse, please email:oa@electrochem.org.
- 出版日期2016
