A study of formation and growth of the anodised surface layer on cast Al-Si alloys based on different analytical techniques

作者：Zhu Baiwei^*; Seifeddine Salem; Persson Per O A; Jarfors Anders E W; Leisner Peter; Zanella Caterina

来源：Materials and Design, 2016, 101: 254-262.

DOI：10.1016/j.matdes.2016.04.013

• Al-Si cast alloys
• Anodising
• Oxide layers
• Silicon

This paper aims to investigate the mechanisms of formation and growth of the anodised surface layer on Al-Si castings by applying different analytical techniques such as optical microscopy, scanning electron microscopy (SEM), scanning transmission electron microscopy (STEM), and X-ray computer tomography (X-ray CT) scanning. Three different Al alloys with various Si content (2.43%, 3.53% and 5.45%) were investigated. Si particle morphological modification by Sr addition, as well as directional solidification, was used to vary the microstructural coarseness in a controlled manner to study the influence of these parameters on the growth behaviour of the oxide layer. This study observed residual unanodised Al phases trapped beneath or between Si particles in the oxide layer. It was found, depending on the geometry and morphology of Si particles, that Al can be shielded by Si particles and prevented from oxidising.

• 出版日期2016-7-5