An efficient solver of the saturation equation in liquid composite molding processes

作者：Garcia J A^*; Gascon Ll; Chinesta F; Ruiz E; Trochu F

来源：International Journal of Material Forming, 2010, 3: S1295-S1302.

DOI：10.1007/s12289-010-0681-8

• Resin transfer molding
• Transport problems
• Saturation
• Second order schemes
• TVD
• Flux limiter

A major issue in Liquid Composite Molding Process (LCM) concerns the reduction of voids formed during the resin filling process. Reducing the void content increases the quality of the composite and improves its mechanical properties. Most of modeling efforts on process simulation of mold filling has been focused on the single phase Darcy's law, with resin as the only phase, ignoring the formation and transport of voids. The resin flow in a partially saturated region can be characterized as two phase flow through a porous medium. The mathematical formulation of saturation in LCM takes into account the interaction between resin and air as it occurs in a two phase flow. This model leads to the introduction of relative permeabilities as a function of saturation. The modified saturation equation is obtained as a result, which is a nonlinear advection-diffusion equation with viscous and capillary phenomena. In this work, a flux limiter technique has been used to solve a modified saturation equation for the LCM process. The implemented algorithm allows a numerical optimization of the injected flow rate which minimizes the micro/macroscopic void formation during mold filling. Some preliminary numerical results are presented here in order to validate the proposed mathematical model and the numerical scheme. This formulation opens up new opportunities to improve LCM flow simulations and optimize injection molds.

• 出版日期2010-9