An improved technique for the solution of edge crack problem for finite plate

作者：Chen Y Z^*; Lin X Y; Wang Z X

来源：Computational Materials Science, 2009, 47(1): 128-134.

DOI：10.1016/j.commatsci.2009.06.023

• Edge crack
• Stress intensity factor
• T-stress
• Complex potentials
• Numerical solution

This paper provides a detailed examination for the edge crack problem of finite plate. The Williams expansion for the crack problem is used first. Secondly, the complex potentials for the central crack problem are used in the present study, which is called the improved technique hereafter. In both techniques, the eigenfunction expansion variational method (EEVM) is used for evaluating the undetermined coefficients in the expansion form. The ratio of height versus width of plate (h/w) is varying from 1.5, 1.0, 0.75, 0.5, 0.4, 0.3 to 0.25. The ratio of edge crack length versus width of plate (a/w) takes two sets: (1) a/w = 0.1, 0.2.... to 0.9, (2) a/w = 0.01, 0.02.... to 0.09. The detailed computation proves that for moderate cases of the a/w ratio, for example, 0.2 < a/w < 08, the deviations for SIFs and T-stress from two techniques are minor. However, for the case of short edge crack length, for example, a/w < 0.05, the deviations for SIFs and T-stress from two techniques are significant. It is found that the Williams expansion may not be suitable for the short edge crack, for example, a/w < 0.05.

• 出版日期2009-11
• 单位江苏大学