All Electrochemical Fabrication of a Platinized Nanoporous Au Thin-Film Catalyst

作者：McCurry Daniel A; Kamundi Martha; Fayette Matthew; Wafula Fred; Dimitrov Nikolay^*

来源：ACS Applied Materials & Interfaces, 2011, 3(11): 4459-4468.

DOI：10.1021/am2011433

• Pt
• nanoporous Au
• dealloying
• platinization
• catalysis
• formic acid oxidation

In an effort to decrease the high cost associated with the design, testing, and production of electrocatalysts, a completely electrochemical scheme has been developed to deposit and platinize a nanoporous Au (NPG) based catalyst for formic acid oxidation. The proposed route enables synthesis of an alternative to the most established, nanoparticles based catalysts and addresses issues of the latter associated with either contamination inherent from the synthetic route or poor adhesion to the supporting electrode. The synthetic protocol includes as a first step, electrochemical codeposition of a Au((1-x))Ag(x) alloy in a thiosulfate based electrolyte followed by selective electrochemical dissolution (dealloying) of Ag as the less noble metal, that generates an ultrathin and preferably continuous porous structure featuring thickness of less than 20 nm. NPG is then functionalized with Pt (no thicker than 1 non) by surface limited redox replacement (SLRR) of underpotentially deposited Pb layer to form Pt-NPG. SLRR ensures complete coverage of the surface with Pt, believed to spread evenly over the NPG matrix. Testing of the catalyst at a proof-of-concept level demonstrates its high catalytic activity toward formic acid oxidation. Current densities of 40-50 mA cm(-2) and mass activities of 1-3 A.mg(-1) (of combined Pt Au catalyst) have been observed and the Pt-NPG thin films have lasted over 2600 cycles in standard formic acid oxidation testing.

• 出版日期2011-11