Automated impact device with non-synchronous impacts: a practical solution for modal testing during operation

作者：Ong Zhi Chao; Lim Hong Cheet; Brandt Anders

来源：Journal of Zhejiang University-Science A(Applied Physics & Engineering), 2018, 19(6): 452-460.

DOI：10.1631/jzus.A1700431

• Auto impact device
• Frequency response function (FRF)
• Impact-synchronous time averaging
• Manual impact hammer
• Phase synchronization

Previous study has shown that synchronization of phases between impacts and the cyclic load component should be avoided to improve the effectiveness of operational modal testing, i.e. impact-synchronous modal analysis in obtaining a cleaner frequency response function (FRF) estimation with fewer number of averages. However, avoiding the phase synchronization effect is rarely achievable with the current manual impact hammer because of the lack of control of the impact timing. We investigate how to improve FRF estimation in the presence of harmonic disturbances, such as those present in operating rotating machines. An auto impact device is therefore introduced to replace the manual impact hammer. This device ensures that impact intervals can be applied at non-synchronous instances with respect to the harmonic disturbance. We demonstrate that this new device is a viable option for operational modal testing. It allows significant improvement in FRF estimation and shows good correlation of modal extraction data with benchmark experimental modal analysis results.

• 出版日期2018-6