A selectively-coupled shear localization model for friction stir welding process window estimation

作者：Pei, Xianjun; Dong, Pingsha^*

来源：International Journal of Machine Tools and Manufacture, 2017, 123: 89-104.

DOI：10.1016/j.ijmachtools.2017.08.003

• Friction stir welding
• Defect formation mechanism
• Process window estimation
• Shear localization
• Banded structure
• Process modeling

This paper presents a novel computational procedure specifically aimed at gaining modeling capabilities for estimating friction stir welding (FSW) process The proposed model first combines a three-dimensional (3D) transient heating effects with a one-dimensional (1D) shear localization process leading to shear band development within one pin revolution. The resulting shear band width is then compared with the minimum material flow layer thickness required for satisfying both mass conservation and velocity continuity conditions in a two-dimensional (2D) planar material flow around the tool pin. If the shear band width formed within one pin revolution is equal or larger than the minimum material flow layer thickness, conditions for developing a quality weld prevail. Otherwise, conditions for developing various forms of weld defects can be identified, depending upon shear localization behavior predicted. Specifically, the proposed model is shown capable of elucidating some of the major defect formation mechanisms observed in experiments, such as "lack of fill", "abnormal stirring", "surface galling", and "excessive flash", etc. As a result, the selectively-coupled shear localization model enables a theoretical estimation of FSW process window typically represented as a regime of welding speed and stir tool rotation speed combination for a given application, within which acceptable weld quality should be expected. Its application in FSW process window estimation is demonstrated by considering three types of aluminum alloys. In all cases, good agreements are achieved between model-estimated and experimentally-determined process windows. In addition, the proposed model also enables a theoretical estimation of optimum welding parameters within an established process window, e.g., for achieving maximum welding speed while maintaining good weld quality.

• 出版日期2017-12