A novel high-strength and highly corrosive biodegradable Fe-Pd alloy: Structural, mechanical and in vitro corrosion and cytotoxicity study

作者：Capek Jaroslav^*; Msallamova Sarka; Jablonska Eva; Lipov Jan; Vojtech Dalibor

来源：Materials Science & Engineering C-Materials for Biological Applications, 2017, 79: 550-562.

DOI：10.1016/j.msec.2017.05.100

• Iron
• Palladium
• Biodegradability
• Powder Metall.
• Spark plasma sintering

Recently, iron-based materials have been considered as candidates for the fabrication of biodegradable load bearing implants. Alloying with palladium has been found to be a suitable approach to enhance the insufficient corrosion rate of iron-based alloys. In this work, we have extensively compared the microstructure, the mechanical and corrosion properties, and the cytotoxicity of an FePd2 (wt%) alloy prepared by three different routes casting, mechanical alloying and spark plasma sintering (SPS), and mechanical alloying and the space holder technique (SHT). The properties of the FePd2 (wt%) were compared with pure Fe prepared in the same processes. The preparation route significantly influenced the material properties. Materials prepared by SPS-possessed the highest values of mechanical properties (CYS similar to 750-850 MPa) and higher corrosion rates than the casted materials. Materials prepared by SHT contained approximately 60% porosity; therefore, their mechanical properties reached the lowest values, and they had the highest corrosion rates, approximately 0.7-1.2 mm/a. Highly porous FePd2 was tested in vitro according to the ISO 10993-5 standard using L929 cells, and two-fold diluted extracts showed acceptable cytocompatibility. In general, alloying with Pd enhanced both mechanical properties and corrosion rates and did not decrease the cytocompatibility of the studied materials.

• 出版日期2017-10-1