科研之友
微信
新浪微博
Facebook
分享链接
摘要
Novel Ti6Al4V particles-reinforced AZ91 Mg matrix composites were successfully fabricated by stir casting method. The stirring time in semisolid condition directly affected the particle distribution and the quality of the ingots. Furthermore, the optimal speed of the heating and the liquid stirring could overcome particle settlement caused by the density difference between the matrix and the particles. Ti6Al4V particles distributed uniformly in the composites with different particle contents. The average grain size decreased with the increase in the particle contents. The Ti6Al4V particles bonded pretty well with the alloy matrix. In addition, there were some interfacial reactions in the composites. There were rod-like Al3Ti phases at the interface. The precipitates extended from the particle surface to the matrix, and they might improve the interfacial bonding strength. The ultimate tensile strength, yield strength and elastic modulus were enhanced as the particle contents increased, and the elongation was much better than that of.the same matrix material reinforced with SiC particles. Thus, the novel composites exhibit better comprehensive mechanical properties.
- 出版日期2016-10
- 单位哈尔滨工业大学
