摘要

The chiral selector, chitosan (CS), was attached to the silanized capillary via a silane coupling agent, (3-glycidyloxypropyl)trimethoxysilane (GTS), to form the GTS-CS capillary, and results for this capillary were compared with those of a previous study on the copolymerization of CS with methacrylamide (MAA) (forming the MM-CS capillary). The GTS-CS capillary did not exhibit enantioselectivity for D/L-tryptophan, whereas the GTS-BSA capillary, which was prepared by replacement of CS with bovine serum albumin (BSA), succeeded in the chiral separation with an Rs = 2.4 in Tris buffer (50 mM, pH 8.5). To increase CS attachment, the CS units were crosslinked by succinic acid, and the resulting GTS-CS-s capillary phase improved the resolution to 1.9. Alternatively, the SiH-CS-s capillary was constructed by CS attachment on the silicon hydride phase via stepwise silanization and hydrosilation reactions and crosslinking by succinic acid, but this approach could only achieve a resolution of 1.4 in Tris buffer (50mM, pH 9.5). Although the GTS-CS-s and SiH-CS-s capillaries were still inferior to the MM-CS capillary (Rs=3.8), the enantioselectivities of the three capillaries were all in the range of 1.4-1.6. For the (+/-)-catechin sample, the plate heights of the GTS-CS-s and SiH-CS-s capillaries conditioned in pH 8.5 Tris buffer with 60% MeOH modifier were 0.9 cm ((-)-catechin) and 6.0 cm ((+)-catechin)) and 2.9 cm (-) and 3.2 cm (+), respectively, and these heights were comparable to the MM-CS capillary (2.5 cm (-), 6.0 cm (+)) in pH 6.6 phosphate buffer with 80% MeOH. Finally, a racemate of ibuprofen, a weakly acidic anti-inflammatory drug, was successfully baseline resolved by the GTS-CS-s and SiH-CS-s capillaries in the borate buffers, which were 30 mM at pH 7.5 and 10 mM at pH 8.0, respectively.