Lamb wave based ultrasonic imaging of interface delamination in a composite T-joint

作者：Ramadas C; Padiyar Janardhan; Balasubramaniam Krishnan^*; Joshi Makarand; Krishnamurthy C V

来源：NDT & E International, 2011, 44(6): 523-530.

DOI：10.1016/j.ndteint.2011.05.009

• Air-coupled ultrasound
• Finite element method
• Guided waves
• Turning Lamb Modes
• Ultrasonic imaging
• Composite materials

In this article, the complete characterization of the interface delamination in a composite T-joint using ultrasonic guided Iamb waves is discussed. Correlation between the numerically simulated and experimentally obtained B-scans was established. In the B-scan images, different Zones were identified and could be utilized for differentiating the healthy and delaminated T-joints. The length and the width of delamination were computed from traversing the transducers in two orthogonal directions (i.e. called the B-scans, and the D-scans). For the first time, backward propagating mode (called "Turning Lamb Modes") that are generated at corner of the T-joint was observed and verfied. Using a single linear line scan of the "Turning Lamb Modes", both the width and length of interface delamination could be computed. In the present study, the experiments were carried out employing air-coupled ultrasonic transducers.

• 出版日期2011-10