科研之友
微信
新浪微博
Facebook
分享链接
摘要
The irradiance uniformity on target plane is a key issue in laser-driven inertial confinement facilities. In the typical schemes of one-dimensional smoothing by spectral dispersion (1D-SSD) and the "star" grating, the stripe pattern inside the focal spot appears inevitably, besides, the fabrication of the "star" grating is relatively difficult. Thus, a new spectral dispersion smoothing scheme based on a hybrid grating is proposed, which not only achieves the better smoothing effect, but also exhibits some specific advantages in the fabrication and the dispersion way. According to the different direction of the spectral dispersion, the hybrid grating is divided into inner and outer dispersion areas. That is, the dispersion direction of the inter dispersion area is in the horizontal or vertical direction, and the dispersion direction of the outer dispersion area is in the azimuthal direction. When the laser beam with the temporal phase modulation propagates through the hybrid grating, the dispersion directions of the laser beam in the inner and the outer dispersion areas are different, leading to the redistribution of the speckles inside the focal spot in the resultant direction of the translation and rotation on the target plane. Consequently, the focal spot on the target plane achieves the beam smoothing in radial and horizontal or vertical direction. In the present paper, the theoretical model of the hybrid grating scheme based on the spectral dispersion smoothing is built up. Using the theoretical model, the smoothing effect of the hybrid grating scheme is analyzed, and compared with those of the typical schemes of 1D-SSD and the "star" grating. The contrast and the fractional power above the intensity (FOPAI) are used to evaluate the smoothing characteristic of the focal spot. In addition, the influences of the area ratio and groove density in the different dispersion areas of the hybrid grating on beam-smoothing effect are also discussed. Results indicate that when the inner dispersion area accounts for the 0.3-0.5 of the total dispersion area, the hybrid grating scheme can effectively suppress the stripe intensity modulation both in the radial direction and the vertical direction. With increasing the groove densities of the inner and the outer dispersion area in a certain range, the irradiance uniformity of the focal spot is further improved. However, considering the actual processing of the hybrid grating, the appropriate groove density should be selected. Compared with the typical scheme of the 1D-SSD, the scheme of the hybrid grating can achieve the better smoothing effect with the multi-direction spectral dispersion smoothing. Furthermore, the fabrication of the hybrid grating is relatively simple and the irradiation uniformity on the target plane is also good compared with those of the "star" grating scheme.
- 出版日期2016-10-20
- 单位四川大学
