摘要
Silane grafting and water cross-linking of polypropylene (PP) are a recent method to modify its properties, such as melt strength, heat, and chemical resistance. This work aims at grafting silanes onto PP by reactive extrusion. The occurrence of the grafting of silane onto PP was confirmed by Fourier transform infrared (FTIR) and a method based on FTIR was developed to quantify the amount of polymerized silane and that of silane grafted onto PP. The molar mass of the silane-grafted PP and its melt viscosity were also measured. A multi-objective optimization strategy was used to study the effects of processing conditions on the quality of the silane-modified PP. It was concluded that to maximize the amount of silane grafted on PP and minimize the amount of polymerized silane and the decrease in PP chain scission, screw speed and barrel temperature should be low and feed rate high.
- 出版日期2013-7