Size dependent response of large shell elements under in-plane tensile loading

作者：Korgesaar M^*; Remes H; Romanoff J

来源：International Journal of Solids and Structures, 2014, 51(21-22): 3752-3761.

DOI：10.1016/j.ijsolstr.2014.07.012

• Size effects
• Fracture initiation
• Large shell elements
• Finite elements
• Softening

Large-scale thin-walled structures with a low weight-to-stiffness ratio provide the means for cost and energy efficiency in structural design. However, the design of such structures for crash and impact resistance requires reliable FE simulations. Large shell elements are used in those simulations. Simulations require the knowledge of the true stress strain response of the material until fracture initiation. Because of the size effects, local material relation determined with experiments is not applicable to large shell elements. Therefore, a numerical method is outlined to determine the effect of element size on the macroscopic response of large structural shell elements until fracture initiation. Macroscopic response is determined by introducing averaging unit into the numerical model over which volume averaged equivalent stress and plastic strain are evaluated. Three different stress states are considered in this investigation: uniaxial, plane strain and equi-biaxial tension. The results demonstrate that fracture strain is highly sensitive to size effects in uniaxial tension whereas in plane strain or equi-biaxial tension size effects are much weaker. In uniaxial and plane strain tension the fracture strain for large shell elements approaches the Swift diffuse necking condition.

• 出版日期2014-10-15