New Configurations of Micro Plate-Fin Heat Sink to Reduce Coolant Pumping Power

作者：Rezania A^*; Rosendahl L A

来源：Journal of Electronic Materials, 2012, 41(6): 1298-1304.

DOI：10.1007/s11664-011-1887-3

• Thermoelectric generator
• micro plate-fin heat sink configuration
• thermal resistance
• modeling
• mass flow distribution

The thermal resistance of heat exchangers has a strong influence on the electric power produced by a thermoelectric generator (TEG). In this work, a real TEG device is applied to three configurations of micro plate-fin heat sink. The distance between certain microchannels is varied to find the optimum heat sink configuration. The particular focus of this study is to reduce the coolant mass flow rate by considering the thermal resistances of the heat sinks and, thereby, to reduce the coolant pumping power in the system. The three-dimensional governing equations for the fluid flow and the heat transfer are solved using the finite-volume method for a wide range of pressure drop laminar flows along the heat sink. The temperature and the mass flow rate distribution in the heat sink are discussed. The results, which are in good agreement with previous computational studies, show that using suggested heat sink configurations reduces the coolant pumping power in the system.

• 出版日期2012-6