Microstructure characteristics of vacuum glazing brazing joints using laser sealing technique

作者：Liu, Sixing^*; Yang, Zheng; Zhang, Jianfeng^*; Zhang, Shanwen; Miao, Hong; Zhang, Yanjun; Zhang, Qi

来源：Optics and Laser Technology, 2018, 101: 189-194.

DOI：10.1016/j.optlastec.2017.11.016

• Laser brazing
• Wetting
• Vacuum glazing
• Microstructure
• Interface characteristics

Two pieces of plate glass were brazed into a composite of glazing with a vacuum chamber using PbO-TiO2-SiO2-RxOy powder filler alloys to develop a new type of vacuum glazing. The brazing process was carried out by laser technology. The interface characteristics of laser brazed joints formed between plate glass and solder were investigated using optical microscope, scanning electron microscopy (SEM). energy dispersive spectroscopy (EDS) and X-ray diffraction (XRD) techniques. The results show that the inter diffusion of Pb/Ti/Si/O elements from the sealing solder toward the glass and O/Al/Si elements from the glass toward the solder, resulting in a reaction layer in the brazed joints. The microstructure phases of PbTiO3, AlSiO, SiO2 and PbO in the glass/solder interface were confirmed by XRD analysis. The joining of the sealing solder to the glass was realized by the reaction products like fibrous structures on interface, where the wetting layer can help improve the bonding performance and strength between the sealing solder and the plate glass during the laser brazing process.

• 出版日期2018-5
• 单位扬州大学