An algebraic model on the performance of a direct methanol fuel cell with consideration of methanol crossover

作者：Yin Ken Ming^*

来源：Journal of Power Sources, 2007, 167(2): 420-429.

DOI：10.1016/j.jpowsour.2007.02.041

• direct methanol fuel cell
• membrane-electrode-assembly
• methanol crossover
• mixed potential
• mathematical model

An algebraic one-dimensional model on the membrane-electrode-assembly (MEA) of direct methanol fuel cell (DMFC) is proposed. Non-linear regression procedure was imposed on the model to retrieve important parameters: solid polymer electrolyte conductivity K-m, exchange current density of methanol electro-oxidation at anode catalyst surface i(oM),(ref,) and mass diffusivity of methanol in aqueous phase within the porous electrode D-a that correspond to the experimentally measured polarization curves. Although numerical iteration is required for a complete solution, the explicit relationships of methanol concentration, methanol crossover rate, oxygen concentration and cell discharge current density do provide a clear picture of the mass transport and electrochemical kinetics within the various porous media in the MEA. It is shown the cathode mixed potential induced by the parallel reactions of oxygen reduction and oxidation of crossover methanol elucidates the potential drop of the cathode and the decrease of the cell open circuit voltage (OCV). Methanol transport in the membrane is described by the diffusion, electro-osmosis, and pressure induced convection. Detailed accounts of the effects of anode methanol and cathode oxygen feed concentrations on the cell discharge performance are given with correlation to the physical structure and chemical compositions of the catalyst layers (CLs).

• 出版日期2007-5-15