Grain Shape Effects on Permeability, Formation Factor, and Capillary Pressure from Pore-Scale Modeling

作者：Torskaya T; Shabro V; Torres Verdin C^*; Salazar Tio R; Revil A

来源：Transport in Porous Media, 2014, 102(1): 71-90.

DOI：10.1007/s11242-013-0262-7

• Pore scale
• X-ray images
• Permeability
• Electrical conductivity
• Numerical cementation

We invoke pore-scale models to evaluate grain shape effects on petrophysical properties of three-dimensional (3D) images from micro-CT scans and consolidated grain packs. Four sets of grain-packs are constructed on the basis of a new sedimentary algorithm with the following shapes: exact angular grain shapes identified from micro-CT scans, ellipsoids fitted to angular grains, and spheres with volume and surface-to-volume ratio equal to original angular grains on a grain-by-grain basis. Subsequently, a geometry-based cementation algorithm implements pore space alteration due to diagenesis. Eight micro-CT scans and 144 grain-pack images with 500 x 500 x 500 voxels (the resolution units of 3D images) are analyzed in this study. Absolute permeability, formation factor, and capillary pressure are calculated for each 3D image using numerical methods and compared to available core measurements. Angular grain packs give rise to the best agreement with experimental measurements. Cement volume and its spatial distribution in the pore space significantly affect all calculated petrophysical properties. Available empirical permeability correlations for non-spherical grains underestimate permeability between 30 and 70% for the analyzed samples. Kozeny-Carman%26apos;s predictions agree with modeled permeability for spherical grain packs but overestimate permeability for micro-CT images and non-spherical grain packs when volume-based radii are used to calculate the average grain size in a pack. We identify surface-to-volume ratio and grain shape as fundamental physical parameters that control fluid distribution and flow in porous media for equivalent porosity samples.

• 出版日期2014-3