High power Co3O4/ZnO p-n type piezoelectric transducer

作者：Hu Yuh Chung^*; Lee Tsung Han; Chang Pei Zen; Su Pei Chen

来源：Thin Solid Films, 2015, 584: 112-115.

DOI：10.1016/j.tsf.2014.12.041

• Piezoelectric materials
• Piezoelectricity
• Transducers
• Zinc oxide
• Tricobalt tetroxide
• p-n junction

Enhancing the output power of piezoelectric transducer is essential in order to supply sufficient and sustainable power to wireless sensor nodes or electronic devices. In this work, a Co3O4/ZnO p-n type power piezoelectric transducer which can be operated at low frequencies has been developed by utilizing n-type semiconducting zinc oxide (ZnO) and p-type semiconducting tricobalt tetroxide (Co3O4). We utilize ZnO to be the piezoelectric transducer and build a multi-layer (Au/Co3O4/ZnO/Ti) thin film structure. The ZnO thin film with preferred orientation along the (002) plane was deposited under optimized deposition conditions on the flexible titanium (Ti) foil with thickness of 80 mu m. The Co3O4/ZnO interface forms a p-n junction and increases the difference in Fermi levels between the two electrodes, resulting in the great enhancement of output power. The measured output power of the p-n type piezoelectric transducer with optimal resistance of 100 k Omega is 10.4 mu W at low operating frequency of 37 Hz, which is 10.9 times of output power of ZnO piezoelectric transducers.

• 出版日期2015-6-1
• 单位南阳理工学院