Double-Layer-Stacked One Diode-One Resistive Switching Memory Crossbar Array with an Extremely High Rectification Ratio of 10(9)

作者：Yoon Kyung Jean; Kim Gun Hwan; Yoo Sijung; Bae Woorham; Yoon Jung Ho; Park Tae Hyung; Kwon Dae Eun; Kwon Yeong Jae; Kim Hae Jin; Kim Yu Min; Hwang Cheol Seong^*

来源：Advanced Electronic Materials, 2017, 3(7): 1700152.

DOI：10.1002/aelm.201700152

• 3D crossbar memory
• diode selectors
• crossbar sensing schemes
• rectifying ReRAM
• resistive switching memory

A double-layer-stacked 1 diode-1 resistor (1D1R) cross-bar array (CBA) resistance switching random access memory is fabricated. The TiO2-based Schottky diode and the unipolar resistance switching TiO2 comprise the cell selector and nonvolatile memory components, respectively. All the fabrication processes are performed near room temperature through physical vapor deposition processes, and the performance degradation by the thermal budget is well suppressed. As a result, a rectification ratio as high as 1.4 x 10(9) is achieved from the appropriately cycled diode, which can last up to 10(8) cycles in the integrated structure. Such highly promising performance is confirmed from both the upper and lower memory layers, which confirm the possible route for the multistacked memory structure. The two-bit-per-cell operation allows an effective minimum cell area of F-2, which is confirmed from the randomly accessed cells to be completely free from adverse interference through the adoption of an extremely-high-performance diode. The present 1D1R integration technique will eventually allow the fabrication of an extremely high-integration-density (above 1 Gb per block) CBA with the help of the two-port sensing scheme. Such a high-performance CBA device is a feasible contender for memory-dominant computation.

• 出版日期2017-7