科研之友
微信
新浪微博
Facebook
分享链接
摘要
Natural gas has been regarded as the cleanest fuel when compared to the other fossil fuels because of its low emission of greenhouse gases and no particulate matter after combustion. Around 22% of the world's power production is based on natural gas. Combined gas-steam power plants operating with natural gas are preferred in recent years due to their high efficiency and less emission. To meet the world's increasing energy demand, natural gas will continue to be used in the future in increasing amounts. For this reason, it is very, important to design and operate such systems in optimal conditions. Energy conversion systems can be analyzed in terms of energetic, exergetic, economic, and environmental aspects for a good management. When the overall efficiency is increased, it can be said that these four aspects will also improve. In the present study, the modeling, simulation and optimization studies on the combined gas-steam power plants are performed. The most important parameters which influence the efficiency of such plants are determined. The simulation results indicate that the crucial unit is the combustion chamber. The optimization results show that the most effective parameters in the power production are air/fuel ratio, gas/steam ratio and the pressure ratio for the compressor and, thus, the gas turbine. The thermal efficiency of the plant increases by 22.55% and the exergy destroyed decreases by 22.65% using optimal design variables determined by the optimization algorithm in which the objective function is the thermal efficiency. The study demonstrates that the modeling, simulation and optimization can be used for the optimal design of the plants before invested, for operating the present plants at optimal conditions and for analyzing the systems. The minimum detrimental effect on the environment can be provided by optimal design and operation under optimal conditions. The originality of the study is to use an objective function by defining a new efficiency term for the maximum power production with the minimum exergy destruction which results 23.49% increase in the thermal efficiency and, in the meantime, 23.61% decrease in the exergy destruction. This new efficiency term can be used as an objective function in the solution of the optimization problems related with the efficiency of power generating in order to achieve better results.
- 出版日期2017-9-15
