摘要

The NiCuZn ferrite (Ni0.60Cu0.24Zn0.16Fe2O4) has been prepared by a conventional solid-reaction method and sintered at 900 degrees C with different dopants to adapt to the low temperature cofired ceramic (LTCC) technology. Two kinds of dopants, oxide Bi2O3 (BI) and ferroelectric ceramic Bi4Ti3O12 (BIT), are used in different amounts or combinations (2wt%BI, 2wt%BIT, 2wt%BI + 2wt%BIT, 4wt%BI, and 4wt%BIT) to promote the sintering process. Variation of microstructure and density in each sample has been analyzed. Influence of the doping mode on the magnetic properties of the ferrite has been investigated. It can be found that the ferrite doped with BI has an obvious decrease of both M-S and H-C in contrast with the ferrite doped with same amount of BIT. Appropriate amounts of BIT is helpful to not only increase M-S, but also decrease of H-C, compared with the ferrite without doping.