A model for the simultaneous prediction of the flexural and shear deflections of statically determinate and indeterminate reinforced concrete structures

作者：Ramezansefat Honeyeh^*; Barros Joaquim; Rezazadeh Mohammadali

来源：Structural Concrete, 2017, 18(4): 618-633.

DOI：10.1002/suco.201600116

• analytical model
• determinate and indeterminate RC structure
• flexibility method
• flexural and shear deflection
• flexural and shear stiffness

The deformability of the major part of reinforced concrete (RC) structures is the result of the flexural and shear deformations mainly caused by bending and shear diagonal cracking, respectively. However, the evaluation of the shear deformation contribution is relatively difficult due to the complexities involving the shear behavior of cracked RC elements. These complexities are even more complicated when structures are statically indeterminate, since the external and internal forces cannot be determined from direct application of the equilibrium equations. To address these issues, this study aims to develop a novel simplified analytical model based on the flexibility (force) method to predict the deflections of statically indeterminate RC structures up to their failure, which can be in bending or in shear. This analytical model considers the influence of flexural cracks on the shear stiffness degradation of an RC structure after concrete cracking initiation, and has a format adjusted for design practice. The good predictive performance of the analytical model is demonstrated by simulating experimental tests with RC elements where shear deformation has different level of contribution for the total deflection registered in these tests.

• 出版日期2017-8