Artificial Neural Network Modeling of the Deposition Rate of Lactose Powder in Spray Dryers

作者：Keshani Samaneh; Daud Wan Ramli Wan^*; Woo Meng Wai; Talib Meor Zainal Meor; Chuah A Luqman; Russly A R

来源：Drying Technology, 2012, 30(4): 386-397.

DOI：10.1080/07373937.2011.638228

• Artificial neural network (ANN)
• Deposition flux
• Deposition rate
• Glass transition temperature
• Lactose
• Maltodextrin ratio
• Optimization
• Spray drying

A spray dryer is the ideal equipment for the production of food powders because it can easily impart well-defined end product characteristics such as moisture content, particle size, porosity, and bulk density. Wall deposition of particles in spray dryers is a key processing problem and an understanding of wall deposition can guide the selection of operating conditions to minimize this problem. The stickiness of powders causes the deposition of particles on the wall. Operating parameters such as inlet air temperature and feed flow rate affect the air temperature and humidity inside the dryer, which together with the addition of drying aids can affect the stickiness and moisture content of the product and hence its deposition on the wall. In this article, an artificial neural network (ANN) method was used to model the effects of inlet air temperature, feed flow rate, and maltodextrin ratio on wall deposition flux and moisture content of lactose-rich products. An ANN trained by back-propagation algorithms was developed to predict two performance indices based on the three input variables. The results showed good agreement between predicted results using the ANN and the measured data taken under the same conditions. The optimum condition found by the ANN for minimum moisture content and minimum wall deposition rate for lactose-rich feed was inlet air temperature of 140 degrees C, feed rate of 23 mL/min, and maltodextrin ratio of 45%. The ANN technology has been shown to be an excellent investigative and predictive tool for spray drying of lactose-rich products.

• 出版日期2012