High temperature oxidation behavior of AISI 304L stainless steel-Effect of surface working operations

作者：Ghosh Swati^*; Kumar M Kiran; Kain Vivekanand

来源：Applied Surface Science, 2013, 264: 312-319.

DOI：10.1016/j.apsusc.2012.10.018

• Stainless steel
• Surface working
• High temperature oxidation
• Electrochemical impedance spectroscopy

The oxidation behavior of grade 304L stainless steel (SS) subjected to different surface finishing (machining and grinding) operations was followed in situ by contact electric resistance (CER) and electrochemical impedance spectroscopy (EIS) measurements using controlled distance electrochemistry (CDE) technique in high purity water (conductivity <0.1 mu S cm(-1)) at 300 degrees C and 10 MPa in an autoclave connected to a recirculation loop system. The results highlight the distinct differences in the oxidation behavior of surface worked material as compared to solution annealed material in terms of specific resistivity and low frequency Warburg impedance. The resultant oxide layer was characterized for (a) elemental analyses by glow discharge optical emission spectroscopy (GDOES) and (b) morphology by scanning electron microscopy (SEM). Oxide layers with higher specific resistivity and chromium content were formed in case of machined and ground conditions. Presence of an additional ionic transport process has also been identified for the ground condition at the metal/oxide interface. These differences in electrochemical properties and distinct morphological features of the oxide layer as a result of surface working were attributed to the prevalence of heavily fragmented grain structure and presence of martensite.

• 出版日期2013-1-1