A quasi solid-state dye-sensitized solar cell containing binary ionic liquid and polyaniline-loaded carbon black

作者：Chen Po Yen; Lee Chuan Pei; Vittal R; Ho Kuo Chuan^*

来源：Journal of Power Sources, 2010, 195(12): 3933-3938.

DOI：10.1016/j.jpowsour.2009.12.086

• At-rest stability
• Binary ionic liquid
• Polyaniline-loaded carbon black
• Power conversion efficiency
• Quasi solid-state dye-sensitized solar cell

A quasi solid-state dye-sensitized solar cell (DSSC) is fabricated using I-propyl-3-methylimidazolium iodide (PMIII) and polyaniline-loaded carbon black (PACB) as the composite electrolyte. The electrolyte without added iodine is sandwiched between TiO(2) working electrode and platinum counter electrode (CE). A power conversion efficiency (eta) of 5.81% is achieved with this type of cell. With the addition of 1-ethyl-3-methylimidazolium thiocyanate (EMISCN). a low-viscosity ionic liquid (IL), the cell with the binary ionic liquid (bi-IL) renders an efficiency of 6.15%, the best for any quasi solid-state DSSC without the addition of iodine. To fabricate a low cost DSSC using the bi-iL, the platinum layer of the counter electrode is replaced with a polymer layer, 3,3-diethyl-3,4-dihydro-2H-thieno-13,4-bl[1,4] dioxepine (PProdot-Et(2)) through electrodeposition, and the corresponding DSSC shows an efficiency of 5.27%. Atrest stability of the quasi solid-state DSSC with bi-IL is compared with that of a liquid electrolyte DSSC at room temperature; the power conversion efficiency of the former shows a decrease of hardly 3% after 1000 h, while that of the latter shows a decrease of about 30%. The quasi solid-state cell shows unfailing durability at 70 degrees C.

• 出版日期2010-6-15