科研之友
微信
新浪微博
Facebook
分享链接
摘要
Different pre-heating of boron carbide particles for reinforcement and different processing conditions were studied in this work. Being one of the most cost-effective industrial methods, conventional melt stir-casting route was utilized. Result showed that the boron carbide particles distributed well for a suitable pre-heating temperature and processed in air. No reaction product was found at the Al-B4C interfaces at the resolution limit of SEM used in that way.
- 出版日期2004-8
- 单位中国航发北京航空材料研究院; 哈尔滨工程大学
