科研之友
微信
新浪微博
Facebook
分享链接
摘要
A fuzzy logic inference system was designed to predict the grain size of Inconel 718 alloy after upset forging. The system takes as input the original grain size, temperature, and reduction rate at forging and predicts the final grain size at room temperature. It is assumed that the system takes into account the effects that the heterogeneity of deformation and grain growth exerts in this particular material. Experimental trials were conducted in a factory that relies on upset forging to produce preforms for ring rolling. The grain size was reported as ASTM number, as this value is used on site. A first attempt was carried out using a series of 15 empirically based set of rules; the estimation error with these was above two ASTM numbers; which is considered to be very high. The system was modified and expanded to take into account 28 rules; the estimation error of this new system resulted to be close to one ASTM number, which is considered to be adequate for the prediction.
- 出版日期2009-12
