Agglomeration characteristics during fluidized bed combustion of salty wastewater

作者：Ma Jiliang; Liu Daoyin; Chen Zhendong; Chen Xiaoping^*

来源：Powder Technology, 2014, 253: 537-547.

DOI：10.1016/j.powtec.2013.12.003

• Salty wastewater
• Fluidized bed
• Incineration
• Agglomeration
• Additives

Fluidized bed combustion is a well-established and widely used technology for treatment of combustible wastewater. However, agglomeration is always encountered in industrial practice when dealing with wastewater that is rich in alkali metals. The objective of this present paper is to illustrate the agglomeration behaviors during fluidized bed incineration of salty wastewater. Various operational parameters were presented, viz, salt content, bed temperature, fluidizing gas velocity, static bed height, bed materials, and different additives. On the basis of SEM/EDX and XRD analysis of agglomerate samples, the mechanisms of agglomerate formation as well as the inhibition mechanisms of agglomeration for different additives were also discussed. The results show that agglomeration is promoted by the increasing of salt content, bed temperature, bed height, particle size, and by the decline of fluidizing gas velocity. All the additives tested, including CaCO3, Al2O3, Fe2O3 and Kaolin, are effective to different extents in inhibiting agglomeration. Physical effects were found to be the main inhibition mechanisms of agglomeration when the bed temperature is below 850 degrees C. Moreover, better results were also observed with increasing of additive amounts.

• 出版日期2014-2
• 单位东南大学