科研之友
微信
新浪微博
Facebook
分享链接
摘要
Precision drilling with ultra-short pulse lasers (e.g., picosecond and femtosecond) has been advocated to significantly improve the quality of the micro-holes with reduced recast layer thickness and no heat-affected zone. However, a combination of high-power picosecond laser with helical drilling strategy in laser drilling has rarely been reported in previous studies. In the present study, a series of micro-holes with circular, triangular, rectangular, and rhombic shapes (diameter 0.6 mm) were manufactured on stainless steel 304 using a newly developed laser drilling system which incorporated a picosecond laser and a high-speed laser beam rotation apparatus into a five-axis positioning platform. The quality of the helical drilled holes, e.g., recast layer, micro-crack, circularity, and conicity, were evaluated using an optical microscope, an optical interferometer, and a scanning electron microscope. In addition, the microstructure of the samples was investigated following etching treatment. It was demonstrated that the entrance ends, the exit ends, and the side walls of the micro-holes were quite smooth without accumulation of spattering material and formation of recast layer and micro-crack. No tapering phenomenon was observed, and the circularity of the holes was fairly good. There was no distinctive difference with regard to the microstructure between the edges of the holes and the bulk material. Picosecond laser helical drilling can be an effective technique for manufacturing of micro-holes with very high quality. The development of high-power picosecond laser would promote picosecond laser drilling to be more industrial relevance in the future.
