科研之友
微信
新浪微博
Facebook
分享链接
摘要
Purpose This research presents a methodology to characterize life cycle impact data (LCIA) of alternative construction materials outside of the European context. Methods This methodology was based on the characterization of data and life cycle assessment (LCA) using geographic information systems (GIS), which has been proposed as an effective alternative for this purpose. The data were characterized at three levels: global, represented by different production efficiency of materials; regional, represented by the type of electricity mix used in the production and the national transport at the country level; and local, represented by external factors, such as seismic and wind risk zones at the city level. A comparative LCA was used as case study to test the methodology. The functional unit for the LCA was defined as an 18 m(2) core shelter unit consisting of structural elements only. The bill of materials for five designs were calculated, each using a distinctive construction material: bamboo, brick, concrete hollow block, ferro-cement panels, and soil-stabilised bricks. The contributions' variability and uncertainty analysis were used to validate the consistency of the results. The effect of the external constraints (earthquakes and wind) were analysed, and the environmental impact over the whole life cycle was assessed. Five house designs were calculated in twenty locations based on three levels of production efficiency and three transport distance ranges for each country. Results and discussion The results of the bamboo, concrete hollow block and ferro-cement houses overlapped and changed depending on the construction materials' transport distance. Therefore, the level of impact of an average bamboo house can also be achieved by a high-performance block or ferro-cement house. The results showed that in most cases, the buildings with high technical performance can be achieved with low environmental impacts. Conclusions The use of GIS enables the development of characterized LCIA data for construction materials and buildings with a high degree of consistency. Moreover, the proposed approach was able to accurately represent the range of production practices used outside Europe. Finally, the use of the proposed methodology allows for the assessment of building in the early stages of design when uncertainty is at its highest, thereby identifying the improvement potential of each design and recognising the structural needs in specific locations.
- 出版日期2017-8
