摘要

This study investigates the effect of operating variables and influence of milk of lime (MOL) conditions in PCC using a modified reactor. The variables includes: Ca(OH)(2) feed concentration at 0.5 M-2.0 M and CO2 flow rates at 224.0 mL min(-1) and 379.5 mL min(-1), on the particle morphology and size in the gas-liquid route precipitation. The particle morphology and texture as well as the chemical content were sufficiently authenticated using X-ray diffraction (XRD), Fourier transforminfrared spectroscopy (FTIR), scanning electron microscope (SEM) and X-ray fluorescence (XRF). Experimental data show that lower concentration (< 1.0 M) favoured the formation of rhombohedra calcite crystals with the particle size below 100 nm. However, increase in concentration and gas flow rate yielded a coarser crystal particles. Two polymorphs were produced at1 Mreactant, i.e.rhombohedra calcite with CO2 flow rate of 224 mL min(-1) 1 and prismatic calcite at 380 mL min(-1). Molarities higher than 1 M yielded a coarser prismatic crystals, and also has a tendency to crystallize into scalenohedron species especially with higher reactant concentration.

  • 出版日期2017