A novel flux-switching permanent magnet machine with v-shaped magnets

作者：Zhao, Guishu; Hua, Wei^*

来源：AIP Advances, 2017, 7(5): 056655.

DOI：10.1063/1.4976943

• Back electromotive force
• Electromagnetic torques
• Flux-switching permanent magnet machines
• Harmonic distribution
• Magnetic bridge
• Mechanical processing
• Permanent magnets (PMs)
• Utilization ratios

In this paper, firstly a novel 6-stator-coil/17-rotor-pole (6/17) flux-switching permanent magnet (FSPM) machine with V-shaped magnets, deduced from conventional 12/17 FSPM machines is proposed to achieve more symmetrical phase back-electromotive force (back-EMF), and smaller torque ripple by comparing with an existing 6/10 V-shaped FSPM machine. Then, to obtain larger electromagnetic torque, less torque ripple, and easier mechanical processing, two improved variants based on the original 6/17 V-shaped topology are proposed. For the first variant, the separate stator-core segments located on the stator yoke are connected into a united stator yoke, while for the second variant the stator core is a whole entity by adding magnetic bridges at the ends of permanent magnets (PMs). Consequently, the performances of the three 6/17 V-shaped FSPM machines, namely, the original one and the two variants, are conducted by finite element analysis (FEA). The results reveal that the first variant exhibits significantly larger torque and considerably improved torque per magnet volume, i.e., the magnet utilization ratio than the original one, and the second variant exhibits the smallest torque ripple, least total harmonic distribution (THD) of phase back-EMF, and easiest mechanical processing for manufacturing.

• 出版日期2017-5
• 单位东南大学