科研之友
微信
新浪微博
Facebook
分享链接
摘要
PurposeThe objective of this study was to evaluate the influence of coping design modifications on maximum first principal stress (MPS) in a mathematical zirconia ceramic crown model. Materials and MethodsFor a nonlinear, 3D finite element analysis, a simplified tooth model was built on the basis of the average dimensions of mandibular second molars. Virtual tooth reduction was performed to model an abutment with a flat occlusal surface and 16 degrees convergence angle between facing walls. The cement layer was set to a thickness of 100 m. Three different copingsone with 0.5-mm constant thickness; one with constant thickness and extended lingual and proximal collars; and a novel design with zirconia beam reinforcementwere designed to simulate zirconia ceramic restorations. The novel design had strategically positioned zirconia beams on the lingual and marginal ridges to protect veneer ceramics, and was divided into three subdesigns according to the width of the zirconia beam (0.5, 0.8, and 1mm). Combinations of vertical and horizontal load were applied over the distolingual marginal ridge, and the MPSs were evaluated. ResultsThe novel design showed the lowest MPS in veneer ceramics under most loading conditions. The only exception to this was the novel design with a 0.5-mm zirconia beam width under mesial horizontal load. ConclusionsCompared to constant thickness coping with or without extended collars, the novel coping design reduced MPS in veneer ceramics; however, narrow zirconia beams should be avoided to prevent elevations in MPS in veneer ceramic layers.
- 出版日期2014-10
