Development of a New Neurosurgical 5-DOF Parallel Robot for Stereotactic DBS Operations

作者：Kim Sung Mok; Yi Byung Ju; Chung Jae Heon; Cheong Joono; Kim Wheekuk^*

来源：International Journal of Precision Engineering and Manufacturing, 2017, 18(3): 333-343.

DOI：10.1007/s12541-017-0041-4

• Neurosurgical robot
• Kinematic analysis
• Structural analysis
• Calibration
• Position accuracy
• Stereotactic operation

In this study, a new 5-degree of freedom parallel-type robot for neurosurgery is developed and investigated for potential application in deep brain surgery (DBS). The neurosurgical robot consists of the base plate, the moving plate, and three limbs (a PPPU type central limb and two SPS type side limbs) connecting the plates. With an intension to use the developed neurosurgical micro robot with a macro scale robot, the position and kinematic analyses of the macro-micro robot are conducted. A structural analysis under the maximum payload condition is also conducted to confirm its structural rigidity. Then, a macro-micro robot simulator that employs the prototype as a micro robot module is developed to test both its motion capability and its potential application as a stereotactic DBS device. Finally, the absolute position accuracy measurement of the developed micro robot module based on its identified kinematic calibration model verified that its accuracy is comparable to those of existing micro robot module candidates.

• 出版日期2017-3