Annealing temperature dependence of photoluminescent characteristics of silicon nanocrystals embedded in silicon-rich silicon nitride films grown by PECVD

作者：Chao D S^*; Liang J H

来源：Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms , 2013, 307: 344-348.

DOI：10.1016/j.nimb.2012.12.096

• Silicon nanocrystals
• Photoluminescence
• Quantum confinement effects
• Silicon-rich silicon nitride
• Plasma-enhanced chemical vapor deposition

Recently, light emission from silicon nanostructures has gained great interest due to its promising potential of realizing silicon-based optoelectronic applications. In this study, luminescent silicon nanocrystals (Si-NCs) were in situ synthesized in silicon-rich silicon nitride (SRSN) films grown by plasma-enhanced chemical vapor deposition (PECVD). SRSN films with various excess silicon contents were deposited by adjusting SiH4 flow rate to 100 and 200 sccm and keeping NH3 one at 40 sccm, and followed by furnace annealing (FA) treatments at 600, 850 and 1100 degrees C for 1 h. The effects of excess silicon content and post-annealing temperature on optical properties of Si-NCs were investigated by photoluminescence (PL) and Fourier transform infrared spectroscopy (FTIR). The origins of two groups of PL peaks found in this study can be attributed to defect-related interface states and quantum confinement effects (QCE). Defect-related interface states lead to the photon energy levels almost kept constant at about 3.4 eV, while QCE results in visible and tunable PL emission in the spectral range of yellow and blue light which depends on excess silicon content and post-annealing temperature. In addition, PL intensity was also demonstrated to be highly correlative to the excess silicon content and post-annealing temperature due to its corresponding effects on size, density, crystallinity, and surface passivation of Si-NCs. Considering the trade-off between surface passivation and structural properties of Si-NCs, an optimal post-annealing temperature of 600 degrees C was suggested to maximize the PL intensity of the SRSN films.

• 出版日期2013-7-15
• 单位清华大学