Aging Rate of Grade 3 Presspaper Insulation used in Power Transformers

作者：Lelekakis Nick^*; Wijaya Jaury; Martin Daniel; Saha Tapan; Susa Dejan; Krause Christoph

来源：IEEE Transactions on Dielectrics and Electrical Insulation, 2014, 21(5): 2355-2362.

DOI：10.1109/TDEI.2014.004266

• Aging
• cellulose
• hydrolysis
• paper insulation
• oil-paper
• power transformer

Paper materials are used as the insulation of power transformers. Over time these materials slowly degrade, until they reach a point when they no longer function effectively as transformer insulation, and the transformer has then reached its end of life. The aging rate of paper is affected by temperature, water, oxygen and acids. Investigations have been performed previously on Kraft and Kraft thermally upgraded types of paper. However, a different type of paper used in transformer insulation, Grade 3 presspaper (which contains cotton), has not been extensively tested and compared to Kraft paper. In these experiments we studied the aging rate of Grade 3 presspaper and compared it to our previous studies of Kraft paper. Traditionally, the aging rate of paper has been studied in sealed vessels. The problem with this approach is that the chemical environment within the vessel will change during aging, and so the aging rate will be affected. In our experiment setup we controlled the water and oxygen content to more accurately determine the aging rate. Similarly to Kraft paper, the aging rate of Grade 3 presspaper with the same water content increased with oxygen content in the oil. Life curves were developed based on the water content of the paper and the oxygen content of the oil.

• 出版日期2014-10