科研之友
微信
新浪微博
Facebook
分享链接
摘要
Objective: Real-time feedback improves CPR performance. Chest compression data may be obtained from an accelerometer/force sensor, but the impedance signal would serve as a less costly, universally available alternative. The objective is to assess the performance of a method which detects the presence/absence of chest compressions and derives CPR quality metrics from the impedance signal in real-time at 1 s intervals without any latency period. Methods: Defibrillator recordings from cardiac arrest cases were divided into derivation (N = 119) and validation (N = 105) datasets. With the force signal as reference, the presence/absence of chest compressions in the impedance signal was manually annotated (reference standard). The method classified the impedance signal at 1 s intervals as Chest Compressions Present, Chest Compressions Absent or Indeterminate. Accuracy, sensitivity and specificity for chest compression detection were calculated for each case. Differences between method and reference standard chest compression fractions and rates were calculated on a minute-to-minute basis. Results: In the validation set, median accuracy was 0.99 (IQR 0.98, 0.99) with 2% of 1 s intervals classified as Indeterminate. Median sensitivity and specificity were 0.99 (IQR 0.98, 1.0) and 0.98 (IQR 0.95, 1.0), respectively. Median chest compression fraction error was 0.00 (IQR 0.01, 0.00), and median chest compression rate error was 1.8 (IQR 0.6, 3.3) compressions per minute. Conclusion: A real-time method detected chest compressions from the impedance signal with high sensitivity and specificity and accurately estimated chest compression fraction and rate. Future investigation should evaluate whether an impedance-based guidance system can provide an acceptable alternative to an accelerometer-based system.
- 出版日期2016-8
