Achieving quick charge/discharge rate of 3.0 V s(-1) by 2D titanium carbide (MXene) via N-doped carbon intercalation

作者：Zhang, Cheng; Wang, Liang; Lei, Wu^*; Wu, Yuting; Li, Caiwei; Khan, Muhammad Asim; Ouyang, Yu; Jiao, Xinyan; Ye, Haitao; Mutahir, Sadaf; Hao, Qingli^*

来源：Materials Letters, 2019, 234: 21-25.

DOI：10.1016/j.matlet.2018.08.124

• Supercapacitors
• MXene
• N-doped carbon
• Intercalation
• Carbon materials
• Composite materials

The MXenes with excellent chemical and physical properties are novel and promising electrode materials for supercapacitors. However, aggregation and restacking of MXene sheets limit material's electrochemical performance. Here, we report a method to prevent MXene sheets from restacking and significantly improved electrochemical capability of Ti3C2Tx MXene by intercalating with N-doped carbon (NC) introduced from ZIF-8. Ti3C2Tx MXene sheets were prepared by etching Ti3AlC2 powder in HF, then ZIF-8/Ti3C2Tx composite was prepared, followed by annealing in H-2/Ar atmosphere. Benefited from higher specific surface area and electron conductivity, the obtained NC-Ti3C2Tx hybrid shows the quick charge/discharge rate up to 3.0 V s(-1), little IR drop at 50.0 A g(-1), higher specific capacitance of 82.8 F g(-1) at 1.0 A g(-1) (about 210% of the origin), and 100% retention in capacitance after 5000 cycles. This new and effective approach efficiently enhanced the electrochemical performance of Ti(3)C(2)T(x )MXenes and improved them as one of auspicious electrode materials in future energy storage devices.

• 出版日期2019-1-1
• 单位南京理工大学