Processing of uranium oxide and silicon carbide based fuel using polymer infiltration and pyrolysis

作者：Singh Abhishek K; Zunjarrao Suraj C; Singh Raman P^*

来源：Journal of Nuclear Materials, 2008, 378(3): 238-243.

DOI：10.1016/j.jnucmat.2008.04.022

Ceramic composite pellets consisting of uranium oxide, UO2, contained within a silicon carbide matrix, were fabricated using a novel processing technique based on polymer infiltration and pyrolysis (PIP). In this process, particles of depleted uranium oxide, in the form of U3O8, were dispersed in liquid allylhydridopolycarbosilane (AHPCS), and Subjected to pyrolysis up to 900 degrees C under a continuous flow of ultra high purity argon. The pyrolysis of AHPCS, at these temperatures, produced near-stoichiometric amorphous silicon carbide (a-SiC). Multiple polymer infiltration and pyrolysis (PIP) cycles were performed to minimize open porosity and densify the silicon carbide Matrix. Analytical characterization was conducted to investigate chemical interaction between U3O8 and SiC. It was observed that U3O8 reacted with AHPCS during the very first pyrolysis cycle, and was converted to UO2. As a result, final composition of the material consisted of UO2 particles contained in an a-SiC matrix. The physical and mechanical properties were also quantified. It is shown that this processing scheme promotes uniform distribution of uranium fuel source along with a high ceramic yield of the parent matrix.

• 出版日期2008-9-1