摘要

Containment depressurization has been implemented for many nuclear power plants (NPPs) to mitigate the risk of containment overpressurization induced by steam and gases released in LOCA accidents or generated in molten core concrete interaction (MCCI) during severe accidents. Two accident sequences of large break loss of coolant accident (LB-LOCA) and station blackout (SBO) are selected to evaluate the effectiveness of the containment venting strategy for a Chinese 1000 MWe NPP, including the containment pressure behaviors, which are analyzed with the integral safety analyses code for the selected sequences. Different open/close pressures for the venting system are also investigated to evaluate CsI mass fraction released to the environment for different cases with filtered venting or without filtered venting. The analytical results show that when the containment sprays can't be initiated, the depressurization strategy by using the Containment Filtered Venting System (CFVS) can prevent the containment failure and reduce the amount of CsI released to the environment, and if CFVS is closed at higher pressure, the operation interval is smaller and the radioactive released to the environment is less, and if CFVS open pressure is increased, the radioactive released to the environment can be delayed. Considering the risk of high pressure core melt sequence, RCS depressurization makes the CFVS to be initiated 7 h earlier than the base case to initiate the containment venting due to more coolant flowing into the containment.