Analysis and control of a fuel delivery system considering a two-phase anode model of the polymer electrolyte membrane fuel cell stack

作者：He Jinglin^*; Ahn Jongwoo; Choe Song Yul

来源：Journal of Power Sources, 2011, 196(10): 4655-4670.

DOI：10.1016/j.jpowsour.2011.01.019

• PEM fuel cell
• Control
• Two-phase
• Ejector

The fuel delivery system using both an ejector and a blower for a PEM fuel cell stack is introduced as a fuel efficiency configuration because of the possibility of hydrogen recirculation dependent upon load states.
A high pressure difference between the cathode and anode could potentially damage the thin polymer electrolyte membrane. Therefore, the hydrogen pressure imposed to the stack should follow any change of the cathode pressure. In addition, stoichiometric ratio of the hydrogen should be maintained at a constant to prevent a fuel starvation at abrupt load changes.
Furthermore, liquid water in the anode gas flow channels should be purged out in time to prevent flooding in the channels and other layers. The purging control also reduces the impurities concentration in cells to improve the cell performance.
We developed a set of control oriented dynamic models that include a anode model considering the two-phase phenomenon and system components The model is used to design and optimize a state feedback controller along with an observer that controls the fuel pressure and stoichiometric ratio, whereby purging processes are also considered. Finally, included is static and dynamic analysis with respect to tracking and rejection performance of the proposed control.

• 出版日期2011-5-15