科研之友
微信
新浪微博
Facebook
分享链接
摘要
In this study, polyamide 6 (PA 6) was used as matrix material. Materials with eight different compositions were produced by adding 30% (w/w) polypropylene (PP), 2.5% (w/w), 5% (w/w) and 7.5% (w/w) nanoclay and 5% wt. compatibilizer Kraton (SEBS) to PA 6. Pin-on disc abrasive wear tests were carried out under 5 N load, at 1 m/s sliding speed and 12.5m, 25m, 50m and 75 m sliding distances. Emery papers with grid sizes of 80 and 220 grade were used for the tests. Amount of wear, rate of wear and friction coefficient of the composites were obtained from the tests. Also, this study investigated the effect on abrasive wear of PP, nanoclay and compatibilizer added to PA 6.
- 出版日期2018
