Control and characterization of a bistable laminate generated with piezoelectricity

作者：Lee Andrew J^*; Moosavian Amin; Inman Daniel J

来源：Smart Materials and Structures, 2017, 26(8): 085007.

DOI：10.1088/1361-665X/aa7165

• bistable
• laminate
• piezoelectric
• macro fiber composite
• morphing

Extensive research has been conducted on utilizing smart materials such as piezoelectric and shape memory alloy actuators to induce snap through of bistable structures for morphing applications. However, there has only been limited success in initiating snap through from both stable states due to the lack of actuation authority. A novel solution in the form of a piezoelectrically generated bistable laminate consisting of only macro fiber composites (MFC), allowing complete configuration control without any external assistance, is explored in detail here. Specifically, this paper presents the full analytical, computational, and experimental results of the laminate's design, geometry, bifurcation behavior, and snap through capability. By bonding two actuated MFCs in a [0(MFC)/90(MFC)] T layup and releasing the voltage post cure, piezoelectric strain anisotropy and the resulting in-plane residual stresses yield two statically stable states that are cylindrically shaped. The analytical model uses the Rayleigh-Ritz minimization of total potential energy and finite element analysis is implemented in MSC Nastran. The [0(MFC)/90(MFC)] T laminate is then manufactured and experimentally characterized for model validation. This paper demonstrates the adaptive laminate's unassisted forward and reverse snap through capability enabled by the efficiencies gained from simultaneously being the actuator and the primary structure.

• 出版日期2017-8