Analysis on the damage behavior of mixed ground during TBM cutting process

作者：Yang, Haiqing^*; Wang, He; Zhou, Xiaoping

来源：Tunnelling and Underground Space Technology, 2016, 57: 55-65.

DOI：10.1016/j.tust.2016.02.014

• Disc cutter
• TBM
• Three-dimensional model
• Cutting force
• Difficult ground

Accurate prediction of rock cutting forces of disc cutters is especially significant for the design and construction of tunnel boring machine (TBM). Through the analysis of motion trajectory of TBM disc cutters, a three-dimensional model of rock breaking process of disc cutters is established. In terms of the rock strain which is resulted from the interaction between disc cutters and rock during the process of rock breaking, a three-dimensional cutting forces model is proposed with disc cutters set at certain parameters and in certain sizes. Subsequently, the equation of contacting forces between rock and disc cutter is derived. Moreover, a new method has been presented for the study of the rock breaking theory of the disc cutter and it also provides guidance for the design and application of TBM in tunnel excavation. The three-dimensional model for the rock breaking mechanism is used for predicting the cutting force for the situation of mixed ground.The damage field and the rock failure zone induced by disc cutter for mixed ground are also discussed in this study. In detail, the rock damage zones are divided into two parts, one is the left damage field which located in the outside of disc cutter. The other is the right damage field which located in the outside of disc cutter. The influence of the rock ground dip on the rock failure zone was also studied by parameter analysis.

• 出版日期2016-8
• 单位重庆大学