A spectro-microscopic investigation of Fe-Co bimetallic catalysts supported on MgO for the production of thin carbon nanotubes

作者：Maccallini Enrico^*; Tsoufis Theodoros; Policicchio Alfonso; La Rosa Salvatore; Caruso Tommaso; Chiarello Gennaro; Colavita Elio; Formoso Vincenzo; Gournis Dimitrios; Agostino Raffaele G

来源：Carbon, 2010, 48(12): 3434-3445.

DOI：10.1016/j.carbon.2010.05.039

Fe-Co bimetallic catalysts supported on MgO were studied for the catalytic chemical vapor deposition growth of carbon nanotubes (CNTs). Different wt.% metal loadings were investigated at various deposition temperatures and times. Characterization of the products involved thermal analysis (DTA-TGA), X-ray diffraction, spectroscopy (Raman, UPS, EELS and STS) and microscopy (SEM, TEM and STM) techniques. It was found that the metal content is critical, not only to the yield and the structural quality of the synthesized carbon nanotubes, but it can be also used to tune the desired type of synthesized nanotubes. Lower (2 wt.%) loadings of Fe-Co catalysts favor the formation of single- and/or double-wall CNTs for deposition time and temperature 30 min and 800 degrees C, respectively. Thermal analysis and Raman measurements showed that these thin CNTs were synthesized at high amounts (CNT-per-catalyst wt.% of more than 100%), exhibiting high graphitization degree with only traces of by-products (mainly amorphous carbon) among them. Microscopy results revealed the formation of CNTs bundles, consisting of individual nanotubes with less than 2 nm outer diameter, while additional energy loss measurements pointed out that the deposited CNTs are mainly single wall. Higher (10 wt.%) Fe-Co loadings resulted to the formation of multi-wall CNTs.

• 出版日期2010-10