Embedded pitch adapters for the ATLAS Tracker Upgrade

作者：Ullan Miguel^*; Benitez Victor; Pellegrini Giulio; Fleta Celeste; Lozano Manuel; Lacasta Carlos; Soldevila Urmila; Garcia Carmen

来源：Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment , 2013, 732: 178-181.

DOI：10.1016/j.nima.2013.07.078

• Silicon sensors
• Interconnection
• ATLAS Tracker
• ATLAS Upgade
• Detector Technology
• Detector Development

In the current ATLAS tracker modules, sensor bonding pads are placed on their corresponding strips and oriented along the strips. This creates a difference in pitch and orientation between sensor bond pads and readout electronics bond pads. Therefore, a pitch adapter (PA), or "fan-in", is needed. The purpose of these PA is the electrical interconnection of every channel from the detector bonding pads to the readout chips, adapting the different pad pitch. Our new approach is to build those PAs inside the sensor; this is what we call Embedded Pitch Adapters. The idea is to use an additional metal layer in order to define a new group of pads, connected to the strips via tracks with the second metal. The embedded PAs have been fabricated on 4-in, prototype sensors for the ATLAS-Upgrade Endcap Tracker to test their performance and suitability. The tests confirm proper fabrication of the second metal tracks, and no effects on detector performance. No indication of cross-talk between first and second metal channels has been observed. A small indication of possible signal pick-up from the bulk has been observed in a few channels, which needs to be further investigated.

• 出版日期2013-12-21