科研之友
微信
新浪微博
Facebook
分享链接
摘要
In this research a gas-liquid fluidized bed reactor was developed for removing chlorine (Cl) from polyvinyl chloride (PVC) to favor its pyrolysis treatment. In order to efficiently remove Cl within a limited time before extensive generation of hydrocarbon products, the gas-liquid fluidized bed reactor was running at 280-320 degrees C, where hot N-2 was used as fluidizing gas to fluidize the molten polymer, letting the molten polymer contact well with N-2 to release Cl in form of HCl. Experimental results showed that dechlorination efficiency is mainly temperature dependent and 300 degrees C is a proper reaction temperature for efficient dechlorination within a limited time duration and for prevention of extensive pyrolysis; under this temperature 99.5% of Cl removal efficiency can be obtained within reaction time around 1 min after melting is completed as the flow rate of N-2 gas was set around 0.47-0.85 Nm(3) kg(-1), for the molten PVC. Larger N-2 flow rate and additives in PVC would enhance HCl release but did not change the final dechlorination efficiency; and excessive N-2 flow rate should be avoided for prevention of polymer entrainment. HCl is emitted from PVC granules or scraps at the mean time they started to melt and the melting stage should be taken into consideration when design the gas-liquid fluidized bed reactor for dechlorination.
- 出版日期2014-6
- 单位南阳理工学院; 同济大学
