A simplified approach for modelling latent heat storages: Application and validation on two different fin-and-tubes heat exchangers

作者：Neumann Hannah; Palomba Valeria^*; Frazzica Andrea; Seiler Dominik; Wittstadt Ursula; Gschwander Stefan; ReStuccia Giovanni

来源：Applied Thermal Engineering, 2017, 125: 41-52.

DOI：10.1016/j.applthermaleng.2017.06.142

• Phase change materials
• Latent heat storage
• COMSOL simulation

Latent thermal energy storage systems represent a promising alternative to traditional sensible storages, but their exploitation requires a careful design of the system, The present paper reports a mathematical model for the simulation of thermal energy storage systems with phase change materials (PCMs). The model is suitable for the description of a latent heat storage using a fin-and-tube heat exchanger. Accuracy and computational effort are both taken into consideration, by coupling a 1D model for the tubes of the heat exchanger and a reduced 3D model for the material and fin domains. The developed model has been validated for two systems, realised at ITAE and ISE, differing for the PCM employed and the constructive characteristics of the heat exchanger. Results show that the model has a good accuracy and could predict the behaviour of the storages within 40 W error in case of powers and 1 K in case of heat transfer fluid temperatures. When a stable PCM was used, the average deviation between the PCM temperature in experiments and simulation was lower than 0.6 K.

• 出版日期2017-10